Mixing ratio: A:B = 3:1
Color: Colorless, transparent liquid.
Viscosity (25°C, mPa•s):
A: 600–800
B: 50–100
Gel time (25°C, min): 30–50
Curing time (25°C, h): 4–5
Tensile shear strength (MPa): ≥8
Primarily used for repairing surface micro-cracks, pores ("fish eyes"), fine fissures ("crow's feet" or "ant trails"), and irregularities in various types of stone slabs (marble, limestone, granite, sandstone).
4 kg/set
[Instructions for use]
1. Heat or ventilate the stone slabs to remove any moisture.
2. Use a brush to remove dust, debris, and other impurities from the stone surface.
3. Mix the adhesive at an A:B ratio of 3:1 (by weight) and blend thoroughly until homogeneous.
4. Spread the adhesive evenly over the stone surface, applying it with a back-and-forth motion.
5. Initial cure occurs in 3 to 4 hours at 25°C; proceed to the next step after 24 hours.
6. Clean the tools before the adhesive cures.