ANMYZ

English
  • English
  • Portugal
  • Español
  • عربي
  • Türk
  • Русский
  • فارسی

ANMYZ

English
  • English
  • Portugal
  • Español
  • عربي
  • Türk
  • Русский
  • فارسی

AZ-1618 Stone Adhesive/Epoxy Resin (Components A and B) for Vacuum Infusion Systems

Scope of application:
Primarily used in vacuum impregnation processes for coating, covering, repairing cracks, and reinforcing stone blocks. It allows for the repair of cracks of any size (small or large) in stone blocks prior to cutting.

Price Interview

Price Interview

AZ-1618 Stone Adhesive/Epoxy Resin (Components A and B) for Vacuum Infusion Systems

Interview

Select the number of specifications

Please check the product information you want!

Product Detail Applications & Benefits

Mixing ratio: A:B = 3:1

Appearance: A and B are colorless, transparent liquids.

Performance characteristics:

1) Very low viscosity after mixing; excellent penetration capability.

2) High strength and excellent curing, even under humid conditions.

3) Excellent curing at temperatures above 5°C.

4) High resistance to yellowing.

Viscosity (25°C, mPa•s):

A: 700–900

B: 300–400

Gel time (25°C, min): 30–50

Hardening time (25°C, h): 4–5

Tensile shear strength (MPa): ≥8

Precautions

1) Mix the epoxy resin and hardener thoroughly to ensure optimal performance.

2) Use the mixture within the gel time.

3) The product may cause skin irritation. Use appropriate personal protective equipment (PPE). In case of skin contact, wash with plenty of water and seek medical advice.

4) Color can be added to the epoxy resin to match the color of the block; however, a specific pigment must be used.

Storage and Transport

1) Shelf life of two years when stored in a cool, dark place in an airtight container.

2) Non-flammable product. Transport and store as non-hazardous cargo.

High-quality vacuum infusion reinforcement – Field of application:

Primarily used for the vacuum infusion of blocks.

20 kg/pail; 80 kg/set


AZ-1618 Epoxy Resin for Vacuum Infusion

AZ-1618 Epoxy Resin for Vacuum Infusion is a two-component epoxy adhesive system formulated for vacuum infusion, coating, encapsulating and reinforcing stone blocks before cutting. Supplied as components A and B, it cures to a strong, durable bond within the stone and is designed for the demands of natural stone processing and repair. A controlled mixing ratio of A:B = 3:1 gives repeatable results, and the cured resin delivers tensile shear strength of high strength.

Technical data: viscosity at 25 C is very low viscosity. Gel time at 25 C is controlled, with a curing time of standard. The low-viscosity formulation penetrates fine cracks and porous stone before hardening, which is essential for deep, uniform reinforcement. The cured resin is colorless and transparent where clarity matters for the finished stone appearance.

How it is applied: components A and B are mixed in the specified ratio, then poured or injected into the prepared crack, fissure or reinforcement zone. For vacuum infusion, the resin is drawn through flow media into the stone under vacuum. For surface repair, it is applied to fissures and allowed to cure before polishing. Correct mixing and pot life management are important for a complete cure.

Applications: vacuum infusion, coating, encapsulating and reinforcing stone blocks before cutting. The product is compatible with ANMYZ fiberglass mesh, vacuum bagging consumables and dispensing equipment for a complete working system.

Why choose ANMYZ: our epoxy resin range covers block coating, back netting, crack repair and luxury stone restoration, and our technical team can recommend the right formulation for your stone and process. Contact us for data sheets, packing sizes and pricing.

No comment

Product Detail

Mixing ratio: A:B = 3:1

Appearance: A and B are colorless, transparent liquids.

Performance characteristics:

1) Very low viscosity after mixing; excellent penetration capability.

2) High strength and excellent curing, even under humid conditions.

3) Excellent curing at temperatures above 5°C.

4) High resistance to yellowing.

Viscosity (25°C, mPa•s):

A: 700–900

B: 300–400

Gel time (25°C, min): 30–50

Hardening time (25°C, h): 4–5

Tensile shear strength (MPa): ≥8

Precautions

1) Mix the epoxy resin and hardener thoroughly to ensure optimal performance.

2) Use the mixture within the gel time.

3) The product may cause skin irritation. Use appropriate personal protective equipment (PPE). In case of skin contact, wash with plenty of water and seek medical advice.

4) Color can be added to the epoxy resin to match the color of the block; however, a specific pigment must be used.

Storage and Transport

1) Shelf life of two years when stored in a cool, dark place in an airtight container.

2) Non-flammable product. Transport and store as non-hazardous cargo.

High-quality vacuum infusion reinforcement – Field of application:

Primarily used for the vacuum infusion of blocks.

20 kg/pail; 80 kg/set


Applications & Benefits

AZ-1618 Epoxy Resin for Vacuum Infusion

AZ-1618 Epoxy Resin for Vacuum Infusion is a two-component epoxy adhesive system formulated for vacuum infusion, coating, encapsulating and reinforcing stone blocks before cutting. Supplied as components A and B, it cures to a strong, durable bond within the stone and is designed for the demands of natural stone processing and repair. A controlled mixing ratio of A:B = 3:1 gives repeatable results, and the cured resin delivers tensile shear strength of high strength.

Technical data: viscosity at 25 C is very low viscosity. Gel time at 25 C is controlled, with a curing time of standard. The low-viscosity formulation penetrates fine cracks and porous stone before hardening, which is essential for deep, uniform reinforcement. The cured resin is colorless and transparent where clarity matters for the finished stone appearance.

How it is applied: components A and B are mixed in the specified ratio, then poured or injected into the prepared crack, fissure or reinforcement zone. For vacuum infusion, the resin is drawn through flow media into the stone under vacuum. For surface repair, it is applied to fissures and allowed to cure before polishing. Correct mixing and pot life management are important for a complete cure.

Applications: vacuum infusion, coating, encapsulating and reinforcing stone blocks before cutting. The product is compatible with ANMYZ fiberglass mesh, vacuum bagging consumables and dispensing equipment for a complete working system.

Why choose ANMYZ: our epoxy resin range covers block coating, back netting, crack repair and luxury stone restoration, and our technical team can recommend the right formulation for your stone and process. Contact us for data sheets, packing sizes and pricing.

AZ-1618 Stone Adhesive/Epoxy Resin (Components A and B) for Vacuum Infusion Systems
Scope of application:
Primarily used in vacuum impregnation processes for coating, covering, repairing cracks, and reinforcing stone blocks. It allows for the repair of cracks of any size (small or large) in stone blocks prior to cutting.
Long press to look detail
Long by picture save/share
INQUIRY

enquiry form:

  • Please enter the verification code

Inquiry Content:


You have no items to require

Add Successfully

AZ-1618 Stone Adhesive/Epoxy Resin (Components A and B) for Vacuum Infusion Systems

enquiry
INQUIRY

enquiry form:

  • Please enter the verification code

Inquiry Content:


You have no items to require

Add Successfully

PRODUCTS

Epoxy Resin system for stones

Fiberglass mesh/woven

Abrasive

Diamond tools

 

 CONTACT

 

Tel: +852-59278153 
Tax:+852-59278153

Email : [email protected]

COMPANY

About   |  Production Ability    |   Our Advantages   |   Trade Capacity

 

PRODUCTS

Stone adhesive   |   Fiberglass mesh/woven

Abrasive   |   Vaccum Perfusion System

Copyright © 2015-2035 Anmyz Industry Ltd. All Rights Reserved. 

Phone
+86-15920009441
Working Time
Monday to Friday
Qrcode
Whatsapp
Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.