الصفحة الأولى

منتج

مشروع

أخبار

معلومات عنا

اتصل بنا

English
Portugal
Español

الصفحة الأولى

منتج

مشروع

أخبار

معلومات عنا

اتصل بنا

English
Portugal
Español

منتج
Product Detail

AZ-1988 Stone Adhesive/Epoxy resin AB hardener for Luxury Stone Slab Surfuce Crack Filling and Repair

AZ-1988 Stone Adhesive/Epoxy resin AB hardener for Luxury Stone Slab Surfuce Crack Filling and Repair

Stone Adhesive/Epoxy resin AB hardener for Luxury Stone Slab Surfuce Crack Filling and Repair.
Applicable:
Mainly used for repairing and decorating high-end stone materials with micro cracks, sand holes, chicken feet, ant roads, and uneven surfaces. This product is suitable for the production process of both drying main oven lines and pallet trucks. It can replace the models:
RESIN 5008 with catalyst bb25, bx30 and bx40
RESIN 1006 with catalyst bb25, b

سعر للنقاش

للنقاش

حدد عدد المواصفات

يرجى التحقق من معلومات المنتج التي تريدها!

Product Detail

Mix ratio：A:B=3:1 Color:Colorless and transparent liquid.

Viscosity（25℃，mPa•s）:

A：600-800

B：50-100

Gel time（25℃，min）: 30-50

Hardening time（25℃，h）: 4-5

Tensile shear strength（MPa）:≥8

Mainly used for all kinds of slabs (marble, limestone, granite, sandstone) surface micro-cracks, sand holes, chicken feet, ants road, uneven repair.

4kg/set

[Steps for usage]

1.Slabs should be heated or ventilated to remove moisture;

2. Use a brush to remove dust, scum and other impurities from the surface of the stone;

3. Mix glue in A:B=3:1 (by weight ), and mix completely;

4. Scrape back and forth and apply the glue evenly on the surface of the stone;

5. initial curing in 3-4 hours under 25 °C , and proceed to next procedure after 24 hours

6. Please clean the tools before the glue is uncured.

لا توجد تعليقات حتى الآن

سابق : AZ-1618 Stone Adhesive/Epoxy Resin AB for Vaccum Perfusion System for block Wrapping/Coating/Crack Repair/Reinforcement التالي : AZ-1681 Stone adhesive/Epoxy resin for Stone Slab Surface Crack Repair

Product Detail

Mix ratio：A:B=3:1 Color:Colorless and transparent liquid.

Viscosity（25℃，mPa•s）:

A：600-800

B：50-100

Gel time（25℃，min）: 30-50

Hardening time（25℃，h）: 4-5

Tensile shear strength（MPa）:≥8

Mainly used for all kinds of slabs (marble, limestone, granite, sandstone) surface micro-cracks, sand holes, chicken feet, ants road, uneven repair.

4kg/set

[Steps for usage]

1.Slabs should be heated or ventilated to remove moisture;

2. Use a brush to remove dust, scum and other impurities from the surface of the stone;

3. Mix glue in A:B=3:1 (by weight ), and mix completely;

4. Scrape back and forth and apply the glue evenly on the surface of the stone;

5. initial curing in 3-4 hours under 25 °C , and proceed to next procedure after 24 hours

6. Please clean the tools before the glue is uncured.

انسخ رابط المنتج

اضغط لفترة طويلة على الصورة للحفظ / المشاركة

سؤال

استفسار عبر الإنترنت أكثر+

اسم *
صندوق بريد *
اسم الشركة *
متطلب *
إرسال

شيفرة التأكيد

لا تستطيع الرؤية بوضوح؟ تغيير واحد

إلغاء

تحديد

منتجات استشارية：

لم تقم بإضافة أي منتجات！

انضم بنجاح

تواصل الزيارة مطلوب الان