Mixing ratio: A:B = 1:1 Appearance: Blue, White, Gold
Performance characteristics
This product is an adhesive based on modified epoxy resin. It exhibits the following properties:
1. Very low viscosity and excellent penetration capability
2. Efficient curing at low temperatures and in humid conditions
3. Good resistance to aging and to moderate chemical agents
Viscosity (25°C, mPa•s):
A: 15,000–20,000
B: 15,000–20,000
Gel time (25°C, min): 60–90
Curing time (25°C, h): 3–4
Tensile shear strength (MPa): ≥15
Application method
1. Dry the blocks that require repair. It is recommended to expose them to sunlight for a few hours.
2. Seal the cracks on the surface of the blocks using a sealant; then, inject the epoxy resin into the blocks once the sealant has cured.
3. Attach injection nozzles along the cracks at 20 cm intervals.
4. Mix the adhesive thoroughly according to the specified weight ratio, then load it into the injection equipment.
5. Once injection is complete, remove the nozzles after the adhesive has cured and proceed to the next step of the process.
Precautions
1. Cracks must be sealed effectively to prevent the adhesive from leaking.
2. Ensure the injection nozzle is securely attached to prevent it from coming loose.
3. Mix the adhesive thoroughly to avoid incomplete curing.
4. Clean the equipment using alcohol or acetone to prevent clogs. 5. In case of skin contact, rinse immediately with plenty of water.
Storage and transport
1. Store in a cool, dry, and well-ventilated place, in tightly sealed containers; shelf life is one year. Products past their expiration date may still be used if they pass quality tests.
2. Transport and store as non-hazardous cargo.
General reinforcement of stone blocks; Scope of application
Primarily used for repairing internal defects in stone blocks.