Lantor Soric XF 2mm 3mm 5mm CoreMat for Stone Block Vaccum Infusion resin,Soric features pressure-resistant "foam islands" and channels. It makes it the correct choice for vacuum bagging, vacuum infusion, or resin transfer molding (RTM).

fiyat tartışılacak

tartışılacak

Spesifikasyon sayısını seçin

Lütfen istediğiniz ürün bilgilerini kontrol edin!

Buy at Amazon

Product Detail

Lantor Soric XF 2mm 3mm 5mm CoreMat for Stone Block Vaccum Infusion resin,Soric features pressure-resistant 'foam islands' and channels. It makes it the correct choice for vacuum bagging, vacuum infusion, or resin transfer molding (RTM).

Key Solutions for Stone & Vacuum Applications

Depending on your exact goal with the stone panel, evaluate the following materials from the Lantor Composites Range:

For Backing / Adding Thickness under Vacuum: Use Lantor Soric (XF or SF). The channels between the cells allow resin to flow smoothly across the back of the stone panel without needing extra plastic infusion mesh.
For High-Pressure/Autoclave Bonding: If you are bonding the stone structure using high heat or intensive compression, use Lantor Teccore. It is specifically built to withstand collapse under intense process pressures.
For Open Mold Hand Lay-up Only: If you skip the vacuum bag completely and manually roll resin onto the back of the stone fiberglass backing, standard Lantor Coremat will work perfectly as a cost-effective laminate bulker.

Conformable to Parts, Facilitates Resin Flow

Lantor Soric® is the most conformable of our flow media for resin infusion. This product features unique hexagonal flow channels across a carrier sheet that create a steady, even resin front. Lantor Soric quickly builds thickness with up to 35% less resin retention than all-glass laminates.

Compatible with epoxy, polyester, and vinyl ester resins

Can also be used as core material and/or a print blocker

Constructed of nonwoven polyester

Available 2 mm thick, 50' wide

formable of our flow media for resin infusion. This product features unique hexagonal flow channels across a carrier sheet that create a steady, even resin front. Lantor Soric quickly builds thickness with up to 35% less resin retention than all-glass laminates.

Compatible with epoxy, polyester, and vinyl ester resins

Can also be used as core material and/or a print blocker

Constructed of nonwoven polyester

Available 2mm 3mm 5mm thick, 50' wide

henüz yorum yok

Öncesi : Fiberglass Woven Roving 200gr 300gr 400gr 500gr 600gr 800gr 900gr for Stone Block Coating/Wrapping/Envelope/Reinforcement Sonraki : Fiberglass net/mesh/screen 60g 80g 7*9 3*3 4*5 20*10mm for stone marble/granite slab back netting

Product Detail

Key Solutions for Stone & Vacuum Applications

Depending on your exact goal with the stone panel, evaluate the following materials from the Lantor Composites Range:

For Backing / Adding Thickness under Vacuum: Use Lantor Soric (XF or SF). The channels between the cells allow resin to flow smoothly across the back of the stone panel without needing extra plastic infusion mesh.
For High-Pressure/Autoclave Bonding: If you are bonding the stone structure using high heat or intensive compression, use Lantor Teccore. It is specifically built to withstand collapse under intense process pressures.
For Open Mold Hand Lay-up Only: If you skip the vacuum bag completely and manually roll resin onto the back of the stone fiberglass backing, standard Lantor Coremat will work perfectly as a cost-effective laminate bulker.