فارسی
-
English -
Portugal
-
Español
-
عربي
-
Türk
-
Русский
-
فارسی
فارسی
-
English
-
Portugal
-
Español
-
عربي
-
Türk
-
Русский
-
فارسی
PRODUCTS
Lantor Soric XF 2mm 3mm 5mm Core Mat Flow Media for Stone Vacuum Infusion
Lantor Soric XF 2mm 3mm 5mm CoreMat for Stone Block Vacuum Infusion resin,Soric features pressure-resistant "foam islands" and channels. It makes it the correct choice for vacuum bagging, vacuum infusion, or resin transfer molding (RTM).
Process of Vacuum Infusion System for Stone Reinforcement
Process of Vacuum Infusion System for Stone Reinforcement.It can repair and reinforce Stone marble/granite/Quarts blocks .It prevents valuable stone from cracking during cutting.
Epoxy Resin for Vacuum Infusion Reinforcement of Stone Blocks| ANMYZ AZ-1618
Applicable Scope:
Mainly used in Vacuum Perfusion for block Wrapping/Coating/Crack Repair/Reinforcement . It can repair all small or big cracks of stone blocks before cutting.
AZ-VA-5 Vacuum Flow Media /Resin Infusion Mesh Mesh
Infusion Mesh is a 3D, PE knitted mesh that is compatible with standard epoxy, polyester, and vinyl ester resin systems. This standard flow mesh is an economical, black, 4.7 oz./yd2, 3D knitted “shade cloth.” It can be used up to 250˚F (120˚C) and drapes and conforms to compound shapes for easy use on all geometries of composite structures. It’s also used as a reusable breather for debulking at room temperature.
AZ-VA-1 Vacuum Bag
Vacuum Bag
AZ-VD-3 Resin collector / Resin Catch Pot
Designed for vacuum infusion process, our resin catch pot comes with or without vacuum meter.
It collects the excess resin from the process and helps avoid contamination.
AZ-VD-2 Vacuum Infusion Device/Machine/Pump
Vacuum Infusion Device/Machine/Pump
AZ-VA-4 Resin Injection Base
Resin Injection Base
AZ-VA-6 Draft Tube / Infusion Tube
Draft Tube / Infusion Tube
AZ-VA-7 Exhaust Tube /Vacuum Tube for Vacuum Infusion Process of Stone Reinforcement
Exhaust Tube /Vacuum Tube for Vacuum Infusion Process of Stone Reinforcement
AZ-VA-2 Sealing Tape / Sealant Tape
Sealant Tape has improved level of tack and handle-ability for vacuum infusion, wet layup, and bag-to-bag (envelope bagging) processes. It performs best at room temperature and has a maximum use temperature of 302°F (150˚C). If the tape is too cold the tack levels will be dramatically reduced and if it is used at elevated temperatures the tape should be allowed to cool to room temperature before removing it from the surface. This tape is compatible with most vacuum films and tool surfaces.
AZ-VD-1 Vacuum Perfusion Device
Whatsapp
Facebook Messager
Skype
Email
