Lantor Soric XF (available in 2 mm, 3 mm, and 5 mm thicknesses): a core material (*CoreMat*) designed for vacuum resin infusion in stone slabs. Soric features pressure-resistant "foam islands" and integrated flow channels, making it the ideal choice for vacuum bagging, vacuum infusion, or RTM (*Resin Transfer Molding*) processes.
Key solutions for stone and vacuum applications
Depending on your specific objectives for the stone panel, consider the following materials from the Lantor Composites range:
For structural backing / increasing thickness under vacuum: Use Lantor Soric (XF or SF). The channels between the cells allow resin to flow smoothly across the back of the stone panel, eliminating the need for additional plastic infusion meshes.
For high-pressure/autoclave bonding: If you are bonding the stone structure using high heat or intense compression, use Lantor Teccore. It is specifically engineered to resist collapse under high-pressure processing conditions.
For open-mold hand lamination: If you are not using a vacuum bag and are applying resin manually with a roller over the fiberglass reinforcement on the stone, standard Lantor Coremat serves as an excellent, cost-effective laminate filler material.
Conformable to parts, facilitates resin flow
Lantor Soric® is the most conformable of our flow materials for resin infusion. This product features unique hexagonal flow channels set on a base, which create a consistent and uniform resin flow front. Lantor Soric allows for a rapid increase in thickness while requiring up to 35% less resin than laminates composed solely of fiberglass. Compatible with epoxy, polyester, and vinyl ester resins
Can also be used as a core material and/or as a barrier against surface print-through (*print blocker*)
Made of non-woven polyester
Available in thicknesses of 2 mm, 3 mm, and 5 mm; width of 50 inches (approx. 1.27 m)