Fiberglass Woven Roving / Fabric for Block Wrapping
Fiberglass Woven Roving / Fabric for Block Wrapping is a fiberglass reinforcement material supplied in basis weights of 200g, 300g, 500g, 600g and 800g and widths of 1m-2m. In woven roving form it delivers high tensile strength and good resin wet-out, making it suitable for stone processing, block coating, wrapping and reinforcement. Fiberglass reinforcement is essential in stone processing because it adds strength across natural cracks and weak zones, allowing fragile stone to be cut and polished with far less breakage.
Technical characteristics: the fibers are selected for compatibility with epoxy, polyester and vinyl ester resin systems used in stone reinforcement. The woven roving construction offers a balance of strength, drape and resin absorption, and the range of basis weights lets processors choose the right reinforcement for each stone type and application. The material is non-corrosive, moisture resistant and dimensionally stable.
How it is applied: the fabric or mat is placed over the prepared stone surface, impregnated with resin by hand lay-up or vacuum infusion, and cured to form a strong composite layer. For block coating and wrapping, several layers may be applied to build the required reinforcement around the block before cutting.
Applications: stone processing, block coating, wrapping and reinforcement. It works with ANMYZ epoxy resins, vacuum bags, flow media, sealing tape and infusion tubes as part of a complete reinforcement system.
Why choose ANMYZ: we manufacture a broad range of fiberglass fabrics, mats, meshes and rovings and can advise on the correct weight and layering for your stone and process. Contact us for weights, widths, roll lengths and pricing.